diver.net

DIY spring straps


AquaFlite Custom Wetsuits, Dive Skins, and Dive Parkas


[ Follow Ups ] [ Post Followup ] [ California Scuba Diving BBS ] [ FAQ ]

Posted by Jeff Shaw on October 29, 2005 at 17:20:07:

In Reply to: Re: Re: Jet Fins w/ spring straps posted by Jerry on October 29, 2005 at 12:41:10:

Jerry has very good product.

It seems out of my pocketbooks range, so I made my own.
They are in the get the kinks out stage, but if you are a tinkerer, DIY type or get bummed out that all those tools in the garage are just sitting there, the process is easy.

www.atlanticunderwater.com/equipment/springstraps.pdf

This shows a good solution. Perhaps $10.00 per pair.

I did it a bit differently. I used Heavy wire-ties to affix the spring to the post, This may be a failure point. we shall see. Then I used inner-tube rubber from a thin racing bicycle inner-tube. I had this so I didn't factor this in. I don't know if the rubber will be a problem, but after 20 dives all is well.

My next attempt will be to use a blowtorch to modify the last loop or two so that the spring will wrap directly around the post.

Oh yea, getting the internal string length right was a comedy event...

-Jeff



Follow Ups:


Name:
E-Mail:
Subject:
Message:
Optional Link URL:
Optional Link Title:
Optional Image URL:
Post Background Color: White     Black
Post Area Page Width: Normal   Full
You must type in the
scrambled text key to
the right.
This is required to
help prevent spam bots
from flooding this BBS.
capcha
Text Key:

      


diver.net